MAX6406BS31+T Overview

There are 4 terminals on this power management that allow it to be mounted. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Please find attached 1 functions for your reference in this IC power. This power managment ic consists of 1 channels, each of which can be used independently. Please find attached 4-WFBGA, CSPBGA functions for your reference in this IC power. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 3V supply voltages. Power management conducts at a voltage of 1. Using Surface Mount, IC management is mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, IC powers are 4 pins on the board. 4 pins make up the power management. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. Supplied with a operating current of 1μA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using MAX6406, the base power ics number.

MAX6406BS31+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1μA operating supply current

MAX6406BS31+T Applications

There are a lot of Maxim Integrated MAX6406BS31+T Voltage Supervisors applications.

• Kitchen appliances
• Important electronics for automotive protection
• Military electronics
• Magnetic resonance imaging
• Rechargeable batteries
• Transformer load monitoring equipment
• Electronics installed in the vehicle
• Insulation fault location system
• Embedded computing
• Utility meter