MAX6411BS45+T Overview
This power management consists of 4 mounting terminals on which it can be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). To assist you, this IC power includes 1 functions. There are 1 channels on this power managment ic that can be found in a series. There are 4-WFBGA, CSPBGA functions included in this PMIC so that you can refer to them. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. Manage ics operate at 3V supply voltages. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by a Surface Mount-axis. A total of 4 pins are located on this power management. This power management has 4 pins. A voltage (Vsup) that doesn't fall below 1.2V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. There is a supply current of 1μA for the power management. A similar IC managements number of the manufacturer can always be found by using MAX6411, the base power ics number.
MAX6411BS45+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
1μA operating supply current
MAX6411BS45+T Applications
There are a lot of Maxim Integrated MAX6411BS45+T Voltage Supervisors applications.
- Sensitive sensors
- Data storage applications
- Transformer load monitoring equipment
- Urban rail transit weak current power monitoring
- Detection of phase loss
- Set top box
- Fire equipment power monitoring system
- Power distribution systems of ICU
- Radar
- DVR
