MAX6417UK+T Overview

There are 5 terminals on this power management that allow it to be mounted. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Please refer to this PMIC for 1 functions. This power management is made up of 1 channels which are available in a series format. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 5V volt supply. When 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. In total, IC powers are 5 pins on the board. 5 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. Power management has an output of Open Drain or Open Collector during operation. As far as the supply current of the power management is concerned, it is 2.7μA. In addition, IC management are other features such as [0], to mention only a few. To find similar IC managements from the manufacturer, you can always search by MAX6417.

MAX6417UK+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
2.7μA operating supply current

MAX6417UK+T Applications

There are a lot of Maxim Integrated MAX6417UK+T Voltage Supervisors applications.

• Sensitive sensors
• External alarm
• Efficient information transmission
• Medical-specific insulation monitor
• Dash board
• Telecommunications equipment
• DVR
• Microprocessor system
• Multi-voltage system
• Satellite navigation