MAX6423XS26+T Overview

This power management consists of 4 mounting terminals on which it can be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 1 channels that can be found. There are SC-82A, SOT-343 functions included in this PMIC so that you can refer to them. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 5V-voltage supply. Power management conducts at a voltage of 1. Surface Mount mounts IC management. The power management belongs to the Power Management Circuits subcategory. Power management has a total of 4 pins. There are 4 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Power management' mounting is recommended to be done with the Surface Mount type of mounting. You should set the supervisor's temperature during -40°C~125°C TA . During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. There is a supply current of 2.5μA for the power management. To find similar IC managements from the manufacturer, you can always search by MAX6423.

MAX6423XS26+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
2.5μA operating supply current

MAX6423XS26+T Applications

There are a lot of Maxim Integrated MAX6423XS26+T Voltage Supervisors applications.

• FPGA design
• emergency room
• Microcontroller system
• Detection of phase imbalance
• Utility meter
• Network equipment
• Low voltage/high power - AI, GPU
• Battery cars
• Battery cars
• Electronics installed in the vehicle