Name: MAX6443US16L+T
Brand: Maxim Integrated
SKU: MAX6443US16L+T
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	TO-253-4, TO-253AA
Number of Pins	4
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2010
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	4
ECCN Code	EAR99
Type	Simple Reset/Power-On Reset
Terminal Finish	Tin (Sn)
Subcategory	Power Management Circuits
Max Power Dissipation	320mW
Technology	BICMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Base Part Number	MAX6443
Output	Push-Pull, Totem Pole
Pin Count	4
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1V
Operating Supply Current	7μA
Adjustable Threshold	NO
Watchdog Timer	No
Reset	Active Low
Voltage - Threshold	1.575V
Number of Voltages Monitored	1
Reset Timeout	140ms Minimum
Supply Current-Max (Isup)	0.02mA
Min Reset Threshold Voltage	1.52V
Max Reset Threshold Voltage	1.62V
Threshold Voltage	+1.58V
Undervoltage Threshold	1.52V
Overvoltage Threshold	1.62V
Length	2.92mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX6443US16L+T Product Details

MAX6443US16L+T Overview

This voltage supervisor has a total of 4 mounting terminals that can be used for mounting. In terms of packaging, power management follows the Tape & Reel (TR) model. Please find attached 1 functions for your reference in this IC power. Power management consists of 1 channels, each of which can be used independently. Please refer to power management for TO-253-4, TO-253AA functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. As specified in the package specification, the peak reflow temperature of the package is set at 260. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts power management on the wall. This power ic can be sub-categorized as Power Management Circuits. There are a total of 4 pins on power management. 4 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. Temperature setting for the supervisors should be -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. It is estimated that the voltage supervisor's supply current is 7μA. To find similar IC managements from the manufacturer, you can always search by MAX6443.