MAX6466UR31+ Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 1 channels, each of which can be used independently. In this IC management you will find TO-236-3, SC-59, SOT-23-3 functions for you to refer to. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. When a supply voltage of 3.6V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts power management on the wall. Pin count of the power management is 3. It is recommended that Vsup should not be less than 1V for this IC power. Voltage (Vsup) shouldn't exceed 6V volts in this PMIC. The recommended mounting type for IC management is Surface Mount. We recommend setting the supervisors to -40°C~125°C TA degrees. During operation, this power management system outputs Open Drain or Open Collector. The maximum supply temperature voltage supervisor can handle is 3.5μA.
MAX6466UR31+ Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
MAX6466UR31+ Applications
There are a lot of Maxim Integrated MAX6466UR31+ Voltage Supervisors applications.
- WiFi router
- Radar
- Dash board
- Electronics installed in the vehicle
- Telecommunications equipment
- Display equipment
- Battery cars
- Rechargeable batteries
- DC stabilized power supply module
- Detection of phase loss
