MAX6720AUTSDD3+T Overview

This voltage supervisor has a total of 6 mounting terminals that can be used for mounting. A Strip package is used to package the power management. Power management is possible to find a series of 1 functions. There are 3 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of SOT-23-6 functions. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. During the reflow process, a peak temperature of 260 is specified for the package. A supply voltage of 1V is used to conduct the PMIC chip. There is a voltage supply of 3 for the PMIC chip, and the chip conducts at that voltage. Using Surface Mount, IC management is mounted. A IC power such as this can be classified as a Power Management Circuits power management system. 6 pins are present in total in this power management. There are 6 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Supplied with a operating current of 15μA, this PMIC is capable of fully function as specified. In addition, IC management are other features such as [0], to mention only a few. The voltage supervisor requires a power source of 1/5V volts in order to work correctly.

MAX6720AUTSDD3+T Features

Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current

MAX6720AUTSDD3+T Applications

There are a lot of Maxim Integrated MAX6720AUTSDD3+T Voltage Supervisors applications.

• Efficient information transmission
• Important electronics for automotive protection
• Microcontroller system
• Automotive permanent magnet synchronous motors
• Consumer electronics
• Power distribution systems of ICU
• Detection of phase loss
• Utility meter
• Satellite navigation
• Unattended substation automation