MAX6723UTRVD3+T Overview
It is mounted through 6 terminals on the power management. There is a Tape & Reel (TR)-packaging method applied to IC management. Please refer to this PMIC for 1 functions. This power management is made up of 3 channels which are available in a series format. As a reference, this IC power includes SOT-23-6 functions for your convenience. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. Packages are specified to have an average peak reflow temperature of 260. When 3 is applied to the power ic, it conducts. Surface Mount mounts IC management. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, the power management has 6 pins in it. 6 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type is Surface Mount. You should set the supervisor's temperature during -40°C~85°C . Power management has an output of Open Drain or Open Collector during operation. Supplied with a operating current of 15μA, this PMIC is capable of fully function as specified. It is always advisable to use MAX6723, the base supervisor number, when searching for similar PMICs from the manufacturer. To operate this power management, you will need at least 1/5V volts of power.
MAX6723UTRVD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6723UTRVD3+T Applications
There are a lot of Maxim Integrated MAX6723UTRVD3+T Voltage Supervisors applications.
- Satellite navigation
- Battery-powered equipment
- Battery cars
- Battery cars
- Leakage current detection
- Insulation fault location system
- Detection of phase sequence
- Medical-specific insulation monitor
- Power distribution systems of ICU
- Efficient information transmission
