MAX6732AUTZGD3+T Overview
There are 6 terminals on this power management that allow it to be mounted. Tape & Reel (TR)-packaging is used. There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 1 channels, each of which can be used independently. As a reference, this IC power includes SOT-23-6 functions for your convenience. There are a lot of similarities between this IC management and other Multi-Voltage Supervisor products. IC management is specified that the package peak reflow temperature should be 260. When 2 is applied to the power ic, it conducts. The mount is attached to Surface Mount. This power ic can be sub-categorized as Power Management Circuits. In total, the power management has 6 pins in it. This power management system has 6 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 800mV. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~125°C. Power management has an output of Open Drain or Open Collector during operation. In order to maintain a stable supply current for the power management, 15μA is the recommended value. You can always use MAX6732A, the base supervisor number, to search for similar PMICs of the manufacturer. To operate this power management, you will need at least 1/5V volts of power.
MAX6732AUTZGD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6732AUTZGD3+T Applications
There are a lot of Maxim Integrated MAX6732AUTZGD3+T Voltage Supervisors applications.
- Solar power charger
- Household appliances
- Smart meter
- Microprocessor system
- Sensitive sensors
- Detection of phase loss
- Fire equipment power monitoring system
- Automotive permanent magnet synchronous motors
- Consumer electronics
- Dash board
