MAX6733AUTSDD3+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. Packaging is in the form of a Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. There are 1 channels on this power managment ic that can be found in a series. In this IC management you will find SOT-23-6 functions for you to refer to. This IC power shares lots of benefits with other Multi-Voltage Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 2 is used to conduct the PMIC chip. Surface Mount is the one that mounts power management. This power ic can be sub-categorized as Power Management Circuits. In total, it has 6 pins on IC management. This power management has 6 pins. It is recommended that Vsup should not be less than 800mV for this IC power. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Mounting type Surface Mount is recommended. It is recommended that the supervisor be set to this temperature: -40°C~125°C. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 15μA. A similar IC managements number of the manufacturer can always be found by using MAX6733A, the base power ics number. It requires 1/5V watts of power to operate this voltage supervisor.
MAX6733AUTSDD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6733AUTSDD3+T Applications
There are a lot of Maxim Integrated MAX6733AUTSDD3+T Voltage Supervisors applications.
- Analog circuit
- DVR
- Satellite navigation
- Radio
- Power distribution systems of CCU
- Solar power charger
- Detection of phase sequence
- Electric heating appliances
- DSP
- emergency room
