MAX6733AUTYDD3+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 6 in total. Tape & Reel (TR)-packaging is used. As a reference, this IC management includes 1 functions for your convenience. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please find attached SOT-23-6 functions for your reference in this IC power. With power management, you get a lot of benefits that you won't find in other Multi-Voltage Supervisor products. The package peak reflow temperature is specified to be 260. In a 2 supply voltage, the PMIC chip conducts. Surface Mount is the one that mounts power management. It is possible to subcategorize this power ic as a Power Management Circuits chip. Power management has a total of 6 pins. 6 pins make up the power management. IC management can only work with a supply voltage of 800mV volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Surface Mount mounting is recommended. The supervisors should be set to the following temperature: -40°C~125°C. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The supply current of the power management is 15μA. A similar IC managements number of the manufacturer can always be found by using MAX6733A, the base power ics number. It requires 1/5V watts of power to operate this voltage supervisor.
MAX6733AUTYDD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6733AUTYDD3+T Applications
There are a lot of Maxim Integrated MAX6733AUTYDD3+T Voltage Supervisors applications.
- Detection of phase loss
- Battery cars
- Refrigeration
- Insulation fault location system
- Sensitive sensors
- Cloud computing
- emergency room
- Radar
- Automotive power systems
- Urban rail transit weak current power monitoring
