MAX6865UK26D6S+T Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. In terms of packaging, power management follows the Tape & Reel (TR) model. The purpose of this IC management is to provide you with a reference of 1 functions. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. During operation, the power ic is supplied with a voltage of 2.5V. Power management conducts at a voltage of 1. Surface Mount mounts IC management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. The total number of pins on this power management is 5. Pin count of the power management is 5. IC management can only work with a supply voltage of 1.1V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. There is a supply current of 7μA for the power management. You can always use MAX6865, the base supervisor number, to search for similar PMICs of the manufacturer.

MAX6865UK26D6S+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6865UK26D6S+T Applications

There are a lot of Maxim Integrated MAX6865UK26D6S+T Voltage Supervisors applications.

• Dash board
• Power distribution systems of operating room
• Satellite navigation
• Medical-specific isolation transformer
• Digitally controlled LDO regulators circuit
• DC stabilized power supply module
• Smartphones
• Detection of phase imbalance
• Data storage applications
• Detection of phase loss