MAX6761TAWAD3+T Overview
This voltage supervisor has a total of 8 mounting terminals that can be used for mounting. A Tape & Reel (TR) package is used to package the power management. Please refer to this PMIC for 1 functions. It is possible to find on this power management a series of 2 channels. IC management is packaged as a 8-WDFN Exposed Pad package. There are a number of benefits that this PMIC has in common with other Multi-Voltage Supervisor manage ics. IC management is specified that the package peak reflow temperature should be 260. When 3.6V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 2. Surface Mount is the one that mounts power management. The power management system can be categorized as a Power Management Circuits chip. In total, IC powers are 8 pins on the board. There are 8 pins on the supervisor. It is recommended that Vsup should not be less than 1V for this IC power. This IC power should be powered by no more than 6V volts of supply voltage (Vsup). In this case, Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~125°C degrees. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. There is a supply current of 13μA for the power management. For similar manage ics search of the manufacturer, you can always refer to MAX6761, the base PMIC number.
MAX6761TAWAD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
13μA operating supply current
MAX6761TAWAD3+T Applications
There are a lot of Maxim Integrated MAX6761TAWAD3+T Voltage Supervisors applications.
- Digitally controlled LDO regulators circuit
- Fire equipment power monitoring system
- Important electronics for automotive safety
- Sensitive sensors
- Electronics installed in the vehicle
- Power distribution systems of CCU
- Smart meter
- Cloud computing
- Detection of phase loss
- Important electronics for automotive protection
