MAX6771TAZD4+T Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. It is packaged with Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find 8-WDFN Exposed Pad functions for your reference. With power management, you get a lot of benefits that you won't find in other Regulator/Supervisor products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 14V-voltage supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by Surface Mount. 8 pins are present in total in this power management. Pin count of the power management is 8. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C. Power management has an output of Open Drain or Open Collector during operation. A similar IC managements number of the manufacturer can always be found by using MAX6771, the base power ics number.

MAX6771TAZD4+T Features

Regulator/Supervisor type

MAX6771TAZD4+T Applications

There are a lot of Maxim Integrated MAX6771TAZD4+T Voltage Supervisors applications.

• Multi-voltage system
• Detection of phase sequence
• DVR
• Solar power charger
• Urban rail transit weak current power monitoring
• Power distribution systems of infant care room
• Analog circuit
• Dash board
• Electronics installed in the vehicle
• Digitally controlled LDO regulators circuit