MAX6840XSD1+T Overview
As you can see, this power management is mounted through 4 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. Please find attached 1 functions for your reference in this IC power. Depending on the power managment ic you are looking at, you can find a total of 1 channels. There are SC-82A, SOT-343 functions included in this PMIC so that you can refer to them. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. During the reflow process, a peak temperature of 260 is specified for the package. The supervisor is always powered by a 1.2V volt supply. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. It is possible to subcategorize this power ic as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 4. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 550mV. Voltage (Vsup) shouldn't exceed 3.6V volts in this PMIC. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C. Power management has an output of Open Drain or Open Collector during operation. The supply current of the power management is 16μA. A similar IC managements number of the manufacturer can always be found by using MAX6840, the base power ics number.
MAX6840XSD1+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 550mV
16μA operating supply current
MAX6840XSD1+T Applications
There are a lot of Maxim Integrated MAX6840XSD1+T Voltage Supervisors applications.
- DVR
- Leakage protection
- Radar
- Microprocessor system
- Electronics installed in the vehicle
- External alarm
- Smart meter
- DSP
- Power distribution systems of ICU
- Transformer load monitoring equipment
