MAX6841FUKD0+T Overview

A total of 5 terminals are used to mount this power management. A Tape & Reel (TR) package is used to package the power management. Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by a Surface Mount-axis. It is possible to subcategorize this power ic as a Power Management Circuits chip. A total of 5 pins are located on this power management. Power managment ic pin count is 5. IC management can only work with a supply voltage of 750mV volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 1.8V volts. Surface Mount mounting is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. Power management has an output of Push-Pull, Push-Pull during operation. For this power management, there is an 8.1μA volt supply current. To find similar IC managements from the manufacturer, you can always search by MAX6841.

MAX6841FUKD0+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 750mV
8.1μA operating supply current

MAX6841FUKD0+T Applications

There are a lot of Maxim Integrated MAX6841FUKD0+T Voltage Supervisors applications.

• Important electronics for automotive protection
• Analog circuit
• Network equipment
• Electrical fire monitoring system
• Power communication system
• Microprocessor system
• Urban rail transit weak current power monitoring
• Computer applications
• Smart meter
• Leakage current detection