MAX6854UK20D1+T Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. A Tape & Reel (TR) package is used to package the power management. In this IC power you will find 1 functions for you to refer to. Power management consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. There is a specification for the peak reflow temperature of the package to be 260. During operation, the power ic is supplied with a voltage of 2.5V. IC management is possible to find a succession of 1 voltages that have been checked. By Surface Mount, IC management has been mounted. The power management system can be categorized as a Power Management Circuits chip. It has a total of 5 pins that are attached to IC management. There are 5 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. There is a 7μA supply current present in the power management. A similar IC managements number of the manufacturer can always be found by using MAX6854, the base power ics number.

MAX6854UK20D1+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6854UK20D1+T Applications

There are a lot of Maxim Integrated MAX6854UK20D1+T Voltage Supervisors applications.

• Medical-specific insulation monitor
• Electric heating appliances
• emergency room
• Battery cars
• Leakage current detection
• Display equipment
• Rechargeable batteries
• Kitchen appliances
• Power distribution systems of ICU
• Functional modules