MAX6855UK21D1+T Overview

It is mounted through 5 terminals on the power management. A Tape & Reel (TR) package is used to package the power management. As a reference, this IC management includes 1 functions for your convenience. Power management consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. The package peak reflow temperature is specified to be 260. When 2.5V is applied to the power ic, it conducts. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounts IC management. There is a subcategory of this power ic known as Power Management Circuits. The total number of pins on this power management is 5. Power managment ic pin count is 5. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6855, the base power ics number.

MAX6855UK21D1+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6855UK21D1+T Applications

There are a lot of Maxim Integrated MAX6855UK21D1+T Voltage Supervisors applications.

• Important electronics for automotive safety
• Display equipment
• Automotive power systems
• Transformer load monitoring equipment
• Smart meter
• Medical-specific isolation transformer
• Solar power charger
• Functional modules
• Power distribution systems of ICU
• Insulation fault location system