MAX6855UK34D3+T Overview

This power management consists of 5 mounting terminals on which it can be mounted. It is packaged with Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. This power management is made up of 1 channels which are available in a series format. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. There is a voltage supply of 2.5V for the PMIC chip, and the chip conducts at that voltage. When 1 is applied to the power ic, it conducts. Surface Mount mounts IC management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 5. Pin count of the power management is 5. There should be a minimum voltage supply (Vsup) of 1.1V for this PMIC. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Mounting type Surface Mount is recommended. We recommend setting the supervisors to -40°C~85°C TA degrees. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. For this power management, there is an 7μA volt supply current. It is always advisable to use MAX6855, the base supervisor number, when searching for similar PMICs from the manufacturer.

MAX6855UK34D3+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6855UK34D3+T Applications

There are a lot of Maxim Integrated MAX6855UK34D3+T Voltage Supervisors applications.

• Detection of phase imbalance
• Embedded computing
• WiFi router
• Military communications
• Power distribution systems of operating room
• Smart meter
• DSP
• Electrical fire monitoring system
• Solar power charger
• Microprocessor system