MAX6855UK37D6+T Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. In terms of packaging, power management follows the Tape & Reel (TR) model. Please refer to this PMIC for 1 functions. A series of 1 channels can be found on this supervisor. IC management is packaged as a SC-74A, SOT-753 package. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. The supervisor is always powered by a 2.5V volt supply. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount mounts power management on the wall. The power management belongs to the Power Management Circuits subcategory. In total, it has 5 pins on IC management. 5 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. Supplied with a operating current of 7μA, this PMIC is capable of fully function as specified. It is always advisable to use MAX6855, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6855UK37D6+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6855UK37D6+T Applications
There are a lot of Maxim Integrated MAX6855UK37D6+T Voltage Supervisors applications.
- Power distribution systems of operating room
- Display equipment
- Network equipment
- Medical-specific isolation transformer
- Leakage protection
- Urban rail transit weak current power monitoring
- Efficient information transmission
- WiFi router
- Detection of phase imbalance
- Dash board
