MAX6855UK39D6+T Overview

It is mounted through 5 terminals on the power management. It is packaged with Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 2.5V-voltage supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Using Surface Mount, IC management is mounted. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 5 pins on the board. 5 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This range of temperature should be set for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 7μA. You can always use MAX6855, the base supervisor number, to search for similar PMICs of the manufacturer.

MAX6855UK39D6+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6855UK39D6+T Applications

There are a lot of Maxim Integrated MAX6855UK39D6+T Voltage Supervisors applications.

• DC stabilized power supply module
• External alarm
• Medical-specific insulation monitor
• Urban rail transit weak current power monitoring
• FPGA design
• Data storage applications
• Power distribution systems of CCU
• Consumer electronics
• Stable power system
• Electronics installed in the vehicle