MAX6855UK42D1+T Overview

This power management consists of 5 mounting terminals on which it can be mounted. Tape & Reel (TR)-packaging is used. There are 1 functions included in this PMIC so that you can refer to them. Depending on the power managment ic you are looking at, you can find a total of 1 channels. IC management is packaged as a SC-74A, SOT-753 package. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. The package peak reflow temperature is specified to be 260. A supply voltage of 2.5V is used to conduct the PMIC chip. Power ics operate at 1 supply voltages. Power management is included in the Surface Mount mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. Power management has a total of 5 pins. The pins of the power management system count 5. A voltage (Vsup) that doesn't fall below 1.1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. The power management's supply current is 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6855, the base power ics number.

MAX6855UK42D1+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6855UK42D1+T Applications

There are a lot of Maxim Integrated MAX6855UK42D1+T Voltage Supervisors applications.

• Urban rail transit weak current power monitoring
• Utility meter
• Personal computers
• Functional modules
• Smartphones
• Military communications
• Efficient information transmission
• Power distribution systems of CCU
• Consumer electronics
• FPGA design