MAX6865UK17D3S+T Overview
Power management is mounted through 5 terminals. A Tape & Reel (TR) package is used to package the power management. To assist you, this IC power includes 1 functions. It is possible to find on this power management a series of 1 channels. As a reference, this IC power includes SC-74A, SOT-753 functions for your convenience. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 2.5V. IC management is possible to find a succession of 1 voltages that have been checked. Using Surface Mount, IC management is mounted. The power management belongs to the Power Management Circuits subcategory. 5 pins are present in total in this power management. There are 5 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. A Surface Mount mounting type is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6865, the base power ics number.
MAX6865UK17D3S+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK17D3S+T Applications
There are a lot of Maxim Integrated MAX6865UK17D3S+T Voltage Supervisors applications.
- Medical-specific isolation transformer
- Solar power charger
- Satellite navigation
- Fire equipment power monitoring system
- Computer applications
- DC stabilized power supply module
- Medical-specific insulation monitor
- Refrigeration
- Detection of phase loss
- Utility meter
