MAX6865UK29D5S+T Overview

This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Tape & Reel (TR)-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. Please refer to power management for SC-74A, SOT-753 functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. In a 2.5V supply voltage, the power management conducts. During operation, the power ic is supplied with a voltage of 1. Surface Mount mounts IC management. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. 5 pins are present in total in this power management. 5 pins are present on the power management system. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. The supply current of the power management is 7μA. For similar manage ics search of the manufacturer, you can always refer to MAX6865, the base PMIC number.

MAX6865UK29D5S+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6865UK29D5S+T Applications

There are a lot of Maxim Integrated MAX6865UK29D5S+T Voltage Supervisors applications.

• Battery cars
• Detection of phase loss
• Electrical fire monitoring system
• Display equipment
• Multi-voltage system
• Leakage current detection
• Battery-powered equipment
• Medical-specific insulation monitor
• Insulation fault location system
• Electronics installed in the vehicle