MAX6865UK27D1L+T Overview

There are 5 terminals on this power management that allow it to be mounted. Packaging is in the form of a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. There is a voltage supply of 2.5V for the PMIC chip, and the chip conducts at that voltage. Power management conducts at a voltage of 1. The mount is attached to Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. A total of 5 pins are located on this power management. The pins of the power management system count 5. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.1V volts. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. The power management's supply current is 7μA. It is always advisable to use MAX6865, the base supervisor number, when searching for similar PMICs from the manufacturer.

MAX6865UK27D1L+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6865UK27D1L+T Applications

There are a lot of Maxim Integrated MAX6865UK27D1L+T Voltage Supervisors applications.

• Detection of phase loss
• DVR
• Magnetic resonance imaging
• External alarm
• Smart meter
• Power distribution systems of CCU
• Low voltage/high power - AI, GPU
• Radio
• Transformer load monitoring equipment
• Analog circuit