MAX6865UK27D5L+T Overview

As you can see, this power management is mounted through 5 terminals. This power ic is packaged in a way that looks like a Tape & Reel (TR). Please refer to this PMIC for 1 functions. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. A supply voltage of 2.5V is used to conduct the PMIC chip. IC management conducts in a 1-voltage supply. By Surface Mount, IC management has been mounted. This power ic can be sub-categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 5. 5 pins are present on the power management system. A voltage (Vsup) that doesn't fall below 1.1V as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During operation, this power management system outputs Push-Pull, Totem Pole. Supplied with a operating current of 7μA, this PMIC is capable of fully function as specified. To find similar IC managements from the manufacturer, you can always search by MAX6865.

MAX6865UK27D5L+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6865UK27D5L+T Applications

There are a lot of Maxim Integrated MAX6865UK27D5L+T Voltage Supervisors applications.

• Automotive permanent magnet synchronous motors
• Smart meter
• Utility meter
• Transformer load monitoring equipment
• DSP
• Consumer electronics
• Digitally controlled LDO regulators circuit
• Detection of phase imbalance
• Urban rail transit weak current power monitoring
• Radar