MAX6865UK35D4L+T Overview

As you can see, this power management is mounted through 5 terminals. Power management is packaged in a Tape & Reel (TR) way. To assist you, this IC power includes 1 functions. A series of 1 channels can be found on this supervisor. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. The supervisor is always powered by a 2.5V volt supply. When 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. The power management belongs to the Power Management Circuits subcategory. There are a total of 5 pins on power management. Pin count of the power management is 5. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6865, the base power ics number.

MAX6865UK35D4L+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6865UK35D4L+T Applications

There are a lot of Maxim Integrated MAX6865UK35D4L+T Voltage Supervisors applications.

• Satellite navigation
• Medical-specific insulation monitor
• DVR
• Power distribution systems of operating room
• Urban rail transit weak current power monitoring
• Transformer load monitoring equipment
• Automotive power systems
• Display equipment
• Power distribution systems of ICU
• Dash board