MC34164P-5RA Overview

There are 3 terminals on this power management that allow it to be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. For your reference, this IC power includes a list of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please find attached TO-226-3, TO-92-3 (TO-226AA) (Formed Leads) functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. The supervisor is always powered by a 2.4V volt supply. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by Through Hole. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. The total number of pins on this power management is 3. There are 3 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. A Through Hole mounting type is recommended. You should set the supervisor's temperature during 0°C~70°C TA . The output voltage of this power managment ic during operation is Open Drain or Open Collector. The power management's supply current is 32μA. It is always advisable to use MC34164, the base supervisor number, when searching for similar PMICs from the manufacturer. The power management must be powered by 5V volts to function properly.

MC34164P-5RA Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
32μA operating supply current

MC34164P-5RA Applications

There are a lot of ON Semiconductor MC34164P-5RA Voltage Supervisors applications.

• Personal computers
• Utility meter
• Rechargeable batteries
• Battery-powered equipment
• Leakage protection
• Kitchen appliances
• Radio
• Detection of phase imbalance
• Sensitive sensors
• Power communication system