MAX6869UK21D3S+T Overview

This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. It is packaged with Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. It is possible to find on this power management a series of 1 channels. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. Manage ics operate at 2.5V supply voltages. IC management conducts in a 1-voltage supply. Surface Mount mounts IC management. There is a subcategory called Power Management Circuits for this power management. In total, it has 5 pins on IC management. Pin count of the power management is 5. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 1.1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. The supply current of the power management is 7μA. A similar IC managements number of the manufacturer can always be found by using MAX6869, the base power ics number.

MAX6869UK21D3S+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current

MAX6869UK21D3S+T Applications

There are a lot of Maxim Integrated MAX6869UK21D3S+T Voltage Supervisors applications.

• Cloud computing
• DC stabilized power supply module
• External alarm
• Dash board
• Power distribution systems of operating room
• Set top box
• DSP
• Solar power charger
• Radar
• FPGA design