MAX6894ETI+T Overview

As you can see, this power management is mounted through 28 terminals. Power management is packaged in a Tape & Reel (TR) way. In this PMIC, you can find 1 functions for your reference. This power managment ic consists of 4 channels, each of which can be used independently. In this PMIC, you can find 28-WFQFN Exposed Pad functions for your reference. With power management, you get a lot of benefits that you won't find in other Sequencer products. There is a voltage supply of 4 for the PMIC chip, and the chip conducts at that voltage. Using Surface Mount, IC management is mounted. The power management system can be categorized as a Power Management Circuits chip. A total of 28 pins are located on this power management. This power management system has 28 pins. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 2.7V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Power management recommends the Surface Mount mounting type. The temperature of the supervisors should be set to this range: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. The supervisor's supply current is specified to 900μA. Power management is also possible to add other features such as MANUAL RESET INPUT to name a few. A similar IC managements number of the manufacturer can always be found by using MAX6894, the base power ics number. It is necessary to have 3/5V volts of power in order for this voltage supervisor to operate.

MAX6894ETI+T Features

Sequencer type
Minimum supply voltage of 2.7V
900μA operating supply current

MAX6894ETI+T Applications

There are a lot of Maxim Integrated MAX6894ETI+T Voltage Supervisors applications.

• Refrigeration
• Battery cars
• Smart meter
• Fire equipment power monitoring system
• Radio
• Leakage protection
• Sensitive sensors
• Transformer load monitoring equipment
• Efficient information transmission
• Power distribution systems of operating room