Name: MAX704EPA+
Brand: Maxim Integrated
SKU: MAX704EPA+
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2010
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
ECCN Code	EAR99
Type	Battery Backup Circuit
Terminal Finish	Matte Tin (Sn)
Subcategory	Power Management Circuits
Max Power Dissipation	727mW
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Base Part Number	MAX704
Output	Push-Pull, Totem Pole
Pin Count	8
Power Supplies	5V
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	0V
Operating Supply Current	500μA
Max Supply Current	500μA
Adjustable Threshold	NO
Watchdog Timer	No
Reset	Active Low
Voltage - Threshold	4.4V
Number of Voltages Monitored	1
Reset Timeout	140ms Minimum
Min Reset Threshold Voltage	4.25V
Max Reset Threshold Voltage	4.5V
Undervoltage Threshold	4.25V
Overvoltage Threshold	4.5V
Height Seated (Max)	4.572mm
Length	9.375mm
Width	7.62mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX704EPA+ Product Details

MAX704EPA+ Overview

There are 8 terminals on this power management that allow it to be mounted. In terms of packaging, power management follows the Tube model. As a reference, this IC management includes 1 functions for your convenience. Depending on the power managment ic you are looking at, you can find a total of 1 channels. To assist you, this PMIC includes 8-DIP (0.300, 7.62mm) functions. It is a IC power that shares many benefits with other products from the Battery Backup Circuit line. The package peak reflow temperature is specified to be 260. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. Power ics operate at 1 supply voltages. Using Through Hole, IC management is mounted. This power ic can be sub-categorized as Power Management Circuits. Taking into account all of the pins, this power management has a total of 8. 8 pins are on the supervisor. There should be a minimum voltage supply (Vsup) of 0V for this PMIC. Voltage (Vsup) shouldn't exceed 5.5V volts in this PMIC. Through Hole mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. It is estimated that the voltage supervisor's supply current is 500μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX704, which is the base power ics number. It requires 5V watts of power to operate this voltage supervisor. A maximum supply temperature of 500μA can be used.