MAX708CSA+T Overview

There are 8 terminals on this power management that allow it to be mounted. Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this PMIC, you can find 1 functions for your reference. Power management consists of 2 channels, each of which can be used independently. Please find attached 8-SOIC (0.154, 3.90mm Width) functions for your reference in this IC power. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. There is a specification for the peak reflow temperature of the package to be 260. The supervisor is always powered by a 5V volt supply. Power management conducts at a voltage of 1. The power management is mounted by Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, the power management has 8 pins in it. There are 8 pins on the power managment ic. IC management can only work with a supply voltage of 1V volts. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. Surface Mount mounting is recommended. This range of temperature should be set for the supervisors: 0°C~70°C TA. The output voltage of this power managment ic during operation is Push-Pull, Push-Pull. The power management's supply current is 350μA. A similar IC managements number of the manufacturer can always be found by using MAX708, the base power ics number. The voltage supervisor requires a power source of 5V volts in order to work correctly. Voltage supervisor can work with a supply temperature of 350μA at the most.

MAX708CSA+T Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
350μA operating supply current

MAX708CSA+T Applications

There are a lot of Maxim Integrated MAX708CSA+T Voltage Supervisors applications.

• Stable power system
• Detection of phase sequence
• Smartphones
• Display equipment
• Household appliances
• Dash board
• Multi-voltage system
• Rechargeable batteries
• Power distribution systems of CCU
• Battery-powered equipment