MAX771ESA+ Overview

Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. It is sufficient to generate 1 outputs with this dc motor controller. PMIC is packaged in a solid enclosure of Tube. With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 3V~16.5V. A -40°C~85°C TA dc switcher is not a problem. dc dc regulator is made easier with Surface Mount. Featured in the dcdc regulator is Enable which allows efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of 8 terminations are available in dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE FREQUENCY MODULATION. The DC switcher's nominal voltage is 5V. Other relevant dc to dc converter ics can be found by searching "MAX771". There are a total of 8 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. According to the test statistics, DC regulator outputs 12V voltage. In most cases, the dc dc regulator's output current is 1A. This information should be noted when you begin working with the component. This Surface Mount makes DC switcher suitable for most prototypes and applications. Switching controllers work at 300kHz Hz. The maximum input voltage of dc switcher is 16.5V, so users should limit their voltage accordingly. Voltage 3V is necessary for the supply. The datasheet indicates that the switching converter can output 12V volts at its maximum. 4.8V voltage output is lower than 4.8V.

MAX771ESA+ Features

Transistor Driver Outputs
Enable
PULSE FREQUENCY MODULATION
Frequency: 300kHz

MAX771ESA+ Applications

There are a lot of Maxim Integrated MAX771ESA+ DC to DC converter applications.

• Smart grid
• Series voltage regulation circuits
• Window air conditioners
• Driver circuits
• Product testing
• Pipe bending machines
• Balance equipment
• Packaging
• Lathes
• Automation technology