MAX807NCPE+ Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 16 in total. Packaging is in the form of a Tube. For your reference, this IC power includes a list of 1 functions. On this supervisor, there is a series of 1 channels that can be found. Please find attached DIP functions for your reference in this IC power. There are a lot of similarities between this IC power and other Battery Backup Circuit products. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 5V for the PMIC chip, and the chip conducts at that voltage. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is attached to Through Hole. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 16 pins on power management. There are 16 pins on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 0V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Supplied with a operating current of 70μA, this PMIC is capable of fully function as specified. Additionally, there are many other features that can be found inside of the power management, such as [0]. The voltage supervisor requires a power source of 5V volts in order to work correctly.

MAX807NCPE+ Features

Battery Backup Circuit type
Minimum supply voltage of 0V
70μA operating supply current

MAX807NCPE+ Applications

There are a lot of Maxim Integrated MAX807NCPE+ Voltage Supervisors applications.

• Insulation fault location system
• Digitally controlled LDO regulators circuit
• Power distribution systems of CCU
• Automotive power systems
• FPGA design
• Electronics installed in the vehicle
• Medical-specific isolation transformer
• DSP
• Magnetic resonance imaging
• Leakage protection