MAX815KEPA+ Overview

This power management consists of 8 mounting terminals on which it can be mounted. This power ic is packaged in a way that looks like a Tube. Power management is possible to find a series of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. IC management is packaged as a 8-DIP (0.300, 7.62mm) package. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 4.86V volt supply. Power management conducts at a voltage of 1. By Through Hole, IC management has been mounted. The power management belongs to the Power Management Circuits subcategory. There are a total of 8 pins on power management. This power management has 8 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Through Hole is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. There is a supply current of 85μA for the power management. For similar manage ics search of the manufacturer, you can always refer to MAX815, the base PMIC number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 85μA.

MAX815KEPA+ Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
85μA operating supply current

MAX815KEPA+ Applications

There are a lot of Maxim Integrated MAX815KEPA+ Voltage Supervisors applications.

• Power distribution systems of ICU
• Smart meter
• Network equipment
• Detection of phase sequence
• Radar
• Detection of phase imbalance
• Automotive permanent magnet synchronous motors
• Urban rail transit weak current power monitoring
• Magnetic resonance imaging
• Linux and server computing