MAX817LCPA+ Overview

There are 8 terminals on this power management that allow it to be mounted. Power management is packaged in a Tube way. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. In this IC management you will find 8-DIP (0.300, 7.62mm) functions for you to refer to. There are a lot of similarities between this IC power and other Battery Backup Circuit products. According to the specification, the package's peak reflow temperature is specified to be 260. Manage ics operate at 4.75V supply voltages. A supply voltage of 1 is used to conduct the PMIC chip. By Through Hole, IC management has been mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. 8 pins are present in total in this power management. The pins of the power management system count 8. There should be a minimum voltage supply (Vsup) of 0V for this PMIC. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Power management' mounting is recommended to be done with the Through Hole type of mounting. We recommend setting the supervisors to 0°C~70°C TA degrees. The supervisor's supply current is specified to 11μA. A similar IC managements number of the manufacturer can always be found by using MAX817, the base power ics number. To operate this power management, you will need at least 5V volts of power.

MAX817LCPA+ Features

Battery Backup Circuit type
Minimum supply voltage of 0V
11μA operating supply current

MAX817LCPA+ Applications

There are a lot of Maxim Integrated MAX817LCPA+ Voltage Supervisors applications.

• Battery cars
• Solar power charger
• Detection of phase loss
• Analog circuit
• Battery cars
• WiFi router
• Unattended substation automation
• Stable power system
• Power distribution systems of CCU
• Smart meter