MAX819LCPA+ Overview

There are 8 mounting terminals on the voltage supervisor, each of which has a different function. It is packaged with Tube. In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 1 channels. As a reference, this IC power includes 8-DIP (0.300, 7.62mm) functions for your convenience. As with other Battery Backup Circuit products, this IC management also offers a wide range of benefits. Packages are specified to have an average peak reflow temperature of 260. The supervisor is always powered by a 4.75V volt supply. Power ics operate at 1 supply voltages. By Through Hole, IC management has been mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. There are a total of 8 pins on power management. Pin count of the power management is 8. It is recommended that Vsup should not be less than 0V for this IC power. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. Power management' mounting is recommended to be done with the Through Hole type of mounting. This range of temperature should be set for the supervisors: 0°C~70°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. There is a supply current of 11μA for the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX819, which is the base power ics number. This power management requires 5V power to work.

MAX819LCPA+ Features

Battery Backup Circuit type
Minimum supply voltage of 0V
11μA operating supply current

MAX819LCPA+ Applications

There are a lot of Maxim Integrated MAX819LCPA+ Voltage Supervisors applications.

• Multi-voltage system
• Consumer electronics
• Embedded computing
• Stable power system
• emergency room
• Automotive permanent magnet synchronous motors
• Leakage protection
• DSP
• Refrigeration
• Display equipment