MAX9491ETP095+ Overview

The Tube method is used for packaging clock ICs. The 20-WQFN Exposed Pad package contains this clock generator. It contains a total of 20 terminations within RF synthesizer. To operate this time clock generator, 3.3V voltage should be applied. In this clock generator, LVCMOS, Crystal is used as the input to the clock. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. 200MHz is the maximal value for normal operation. Thanks to the Surface Mount, this electric component can easily be installed on a panel. As far as the supply voltage is concerned, clock PLL can be used with 3V~3.6V. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. There are several logic levels in LVCMOS logic that can be used with this clock generator. This electronic component can be classified into PLL Clock Generator. According to the base part number MAX9491, its related parts can be found.

MAX9491ETP095+ Features

Available in the 20-WQFN Exposed Pad
Supply voltage of 3.3V

MAX9491ETP095+ Applications

There are a lot of Maxim Integrated MAX9491ETP095+ Clock Generators applications.

• Phase modulation cellular systems
• Simple clock clean-up circuits
• Carrier synchronization in wired communication
• Main oscillator in receiver
• Jitter reduction
• Line cards used in telephone exchange
• Satellite receivers
• 1 Gigabit Ethernet
• Threshold extension
• Coherent carrier tracking