24LC024T-E/MNY Overview

In terms of its memory type, it can be classified as Non-Volatile. It comes in a Tape & Reel (TR). An embedded 8-WFDFN Exposed Pad case surrounds memory ics. This chip has an 2Kb 256 x 8 size of memory on it, so a lot of data can be stored on it. There is a mainstream memory format used by this device, which is called EEPROM-format memory. Featuring an extended operating temperature range of -40°C~125°C TA, this device allows it to be used in a variety of demanding applications. There is a voltage range of 2.5V~5.5V for the supply voltage. Its recommended mounting type is Surface Mount. The memory has a clock frequency rotation within 400kHz. When selecting similar parts for the ic memory chip, 24LC024 is often referred to. This memory device is enclosed in a 8-pin package. In this chip, Surface Mount mounting is used, a straightforward, high-efficiency mounting method. It is rated for a nominal supply current of 3mA for this memory component. This device must operate at a minimum temperature of -40°C. The part should not be operated at temperatures above 85°C degrees Celsius as otherwise, the part may be damaged due to the excessive amount of heat. The minimum supply voltage for this part should not be less than 2.5V. The operating voltage of the memory ics shall not exceed 5.5V. There is an 400kHz frequency with which this memory chip processes data. It is recommended that this memory run at a maximum frequency of 400kHz.

24LC024T-E/MNY Features

Package / Case: 8-WFDFN Exposed Pad
8 Pins
Freguency at 400kHz
400kHz terminals

24LC024T-E/MNY Applications

There are a lot of Microchip Technology 24LC024T-E/MNY Memory applications.

• networks
• servers
• Camcorders
• nonvolatile BIOS memory
• cell phones
• networking
• telecommunications
• hard disk drive (HDD)
• eDRAM
• Cache memory