Surface Mount 8 Pin Memory IC 25LC080D 8 kb kb 3mm mm 5mA mA
SOT-23
25LC080DT-I/MNY Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
6 Weeks
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-WFDFN Exposed Pad
Number of Pins
8
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Published
2009
JESD-609 Code
e4
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
ECCN Code
EAR99
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Technology
CMOS
Voltage - Supply
2.5V~5.5V
Terminal Position
DUAL
Peak Reflow Temperature (Cel)
260
Number of Functions
1
Supply Voltage
5V
Terminal Pitch
0.5mm
[email protected] Reflow Temperature-Max (s)
40
Base Part Number
25LC080D
Pin Count
8
Operating Supply Voltage
5V
Interface
SPI, Serial
Memory Size
8Kb 1K x 8
Nominal Supply Current
5mA
Memory Type
Non-Volatile
Clock Frequency
10MHz
Access Time
100 ns
Memory Format
EEPROM
Memory Interface
SPI
Memory Width
8
Write Cycle Time - Word, Page
5ms
Density
8 kb
Standby Current-Max
0.000001A
Serial Bus Type
SPI
Endurance
1000000 Write/Erase Cycles
Write Cycle Time-Max (tWC)
5ms
Data Retention Time-Min
200
Write Protection
HARDWARE/SOFTWARE
Length
3mm
Width
2mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Pricing & Ordering
Quantity
Unit Price
Ext. Price
3,300
$0.49440
$1.4832
25LC080DT-I/MNY Product Details
25LC080DT-I/MNY Overview
In terms of its memory type, it can be classified as Non-Volatile. In addition, memory ics is available in a Tape & Reel (TR) case as well. The file is embedded in a 8-WFDFN Exposed Pad case. On the chip, there is an 8Kb 1K x 8 memory, which is the size of the chip's memory. There is a mainstream memory format used by this device, which is called EEPROM-format memory. Due to its wide operating temperature range, this device can be used in a wide variety of demanding applications. The device is capable of handling a supply voltage of 2.5V~5.5V volts. It is recommended that the mounting type be Surface Mount. On the chip, there are 8 terminations that are planted. For a comprehensive working procedure, this part supports as many as 1 functions. In order to power this memory device, 5V will be necessary. With a clock frequency of 10MHz, the memory rotates on its own. In order to select similar parts, typical manufacturers refer to 25LC080D as the device's base part number. This memory device is enclosed in a 8-pin package. I have noticed that the memory device has 8 pins, which indicates that it has 8 locations in the memory. It is noted that the operating supply voltage of this memory is 5V. Chips such as this one are mounted using Surface Mount mounting, a straightforward method of mounting that is effective. As far as its nominal supply current is concerned, this memory component carries a rating of 5mA. It is helpful to carry data to the CPU using the SPI-type serial bus that this memory integrates with.