Non-Volatile is its memory type. There is a Tube case available. The file is embedded in a 8-SOIC (0.154, 3.90mm Width) case. The chip has an 128Kb 16K x 8 memory. As with most mainstream devices, this one uses EEPROM-format memory. Due to its wide temperature range of -40°C~85°C TA, this device is well suited to a wide range of applications that require high performance. A voltage of 2.7V~5.5V is possible to be applied to the supply. There is a recommended mounting type of Surface Mount for it. There is a clock frequency rotation of the memory within a 20MHz range. In order to select similar parts, typical manufacturers refer to AT25128 as the device's base part number. It is encased in an 8-pin package that contains this ic memory chip. There is a note indicating that this memory chip operates at an 5V volt supply voltage. Chips such as this one are mounted using Surface Mount mounting, a straightforward method of mounting that is effective. The nominal supply current of this memory component is 10mA. A minimum operating temperature of -40°C is required for this device. It is recommended for operation at temperatures no higher than. If this part is to be used, the minimum supply voltage should not be less than 2.7V volts. Ideally, this part should be supplied with a voltage of at least 5.5V. As a result of the frequency of this memory chip, data can be processed at a rate of 20MHz. An 10MHz maximum frequency can be reached by the memory when running at its maximum frequency.