MCP102T-270E/LB Overview

There are 3 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. In this IC management you will find SC-70, SOT-323 functions for you to refer to. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. During operation, the power ic is supplied with a voltage of 1. The mount is provided by Surface Mount. There is a subcategory called Power Management Circuits for this power management. 3 pins are present in total in this power management. This power management system has 3 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. It is estimated that the voltage supervisor's supply current is 1.75μA. To find similar IC managements from the manufacturer, you can always search by MCP102. Voltage supervisor can work with a supply temperature of 1.75μA at the most.

MCP102T-270E/LB Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
1.75μA operating supply current

MCP102T-270E/LB Applications

There are a lot of Microchip Technology MCP102T-270E/LB Voltage Supervisors applications.

• Household appliances
• Unattended substation automation
• Analog circuit
• Detection of phase loss
• Battery-powered equipment
• Smart meter
• Data storage applications
• emergency room
• Power distribution systems of infant care room
• Leakage current detection