MCP1322T-29LE/OT Overview

There are 5 terminals connected to this power management, which makes it easy to mount. Power management is packaged in a Tape & Reel (TR) way. There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels available on this supervisor, and each channel has a different function. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. According to the specification, the package's peak reflow temperature is specified to be 260. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Power management is included in the Surface Mount mount. There is a subcategory of this power ic known as Power Management Circuits. A total of 5 pins are located on this power management. Pin count of the power management is 5. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. The output voltage of this power managment ic during operation is Open Drain, Push-Pull. In order to maintain a stable supply current for the power management, 10μA is the recommended value. It is always advisable to use MCP1322, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature voltage supervisor can handle is 10μA.

MCP1322T-29LE/OT Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
10μA operating supply current

MCP1322T-29LE/OT Applications

There are a lot of Microchip Technology MCP1322T-29LE/OT Voltage Supervisors applications.

• Power distribution systems of infant care room
• Urban rail transit weak current power monitoring
• Refrigeration
• Embedded computing
• Detection of phase loss
• Detection of phase imbalance
• Radio
• Solar power charger
• Insulation fault location system
• Radar