MCP1650S-E/MS Overview

Capsuled in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the switching controller can be used for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. PMIC packaging is solid with a Tube enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. Voltages 2.7V~5.5V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a -40°C~125°C TJ. Using this switching controller, it is possible to switch at 750kHz. A generalization of dc dc regulator can be made using Surface Mount. To ensure efficient switching, this dcdc regulator features a Current Limit, Enable, Low Battery, Power Good. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. A switching converters's terminal (s) sits at the DUAL position. A variety of dc switching's functions can be performed on 8 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input is 3.3V. You can find other relevant dc to dc converter ics by searching "MCP1650". Pins number 8 of switching converter in total. Specially, switching converter corresponds to type Switching Regulator or Controllers. Test statistics indicate DC regulator outputs 100V voltage. In most cases, the dc dc regulator's output current is 100mA. This information should be noted when you begin working with the component. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 88 % during power-up and power-down. The Surface Mount makes DC switcher suitable for most applications and prototypes. It is estimated that this dc regulatorhas a maximum frequency of 850kHz. The maximum input voltage of dc switcher is 5.5V, so users should limit their voltage accordingly. Voltage 2V is needed for the supply. There will be 100mA current output from the dc switcher above 100mA. The datasheet indicates that the switching converter can output 100V volts at its maximum. A current of 120μA is supplied to it. 3.3V voltage output is lower than 3.3V.

MCP1650S-E/MS Features

Transistor Driver Outputs
Switching Frequency: 750kHz
Current Limit, Enable, Low Battery, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 88 %

MCP1650S-E/MS Applications

There are a lot of Microchip Technology
MCP1650S-E/MS DC to DC converter applications.

• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery
• Various CNC machine tools
• Machining centers