MCP6544-I/ST Overview

To facilitate transportation, it comes packaged in 14-TSSOP (0.173, 4.40mm Width) .There is a comparator of type CMOS, Push-Pull, Rail-to-Rail, TTL output on this device.The chip is packaged with Tube .The device is designed with 14 terminations.The chip belongs to Comparator .A comparator supplied with 5V voltage can complete many demanding tasks.Electronic comparator can be classified as a General Purpose chip.There are a total of 4 elements in it.The board includes 14 pins.Electronic comparator is recommended to mount using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .This comparator has 14 pins.In case you are looking for more pin-to-pin solutions, you may want to search MCP6544 .A quiescent current of 1μA is displayed by this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normal operation of the device requires 1mA supply current.If the current supply exceeds 1mA , the comparator might be damaged.This device requires 1.6/5.5V power supplies to operate.

MCP6544-I/ST Features

CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 1μA

MCP6544-I/ST Applications

There are a lot of Microchip Technology
MCP6544-I/ST linear comparators applications.

• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices
• Mobile Phones and Tablets
• Battery-Powered Electronics
• General Purpose Low Voltage Applications
• Limit Comparators