MIC2131-1YTSE Overview

As a result of 16-TSSOP (0.173, 4.40mm Width) Exposed Pad compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tube is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 8V~40V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. The switching controller is capable of switching at the 150kHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Power Good, Soft Start. A search for "MIC2131" will reveal other relevant dc to dc converter ics. 16 pins are present on switching converter. It's important to remember that the dc dc regulator's normaloutput current is 15A, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 92 % to ensure reliability during power-up and power-down. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. DC regulators have a maximum frequency of 170kHz. A temperature -40°C lower than -40°C should be maintained. A temperature of 125°C more than 125°C degrees Celsius should be maintained in the undc regulator. Supplier dc dc controller package for this part is 16-eTSSOP. With this controller, the phase is 1. Voltage is rated 40V for maximum supply.

MIC2131-1YTSE Features

Transistor Driver Outputs
Switching Frequency: 150kHz
Current Limit, Enable, Power Good, Soft Start
Max Duty Cycle: 92 %

MIC2131-1YTSE Applications

There are a lot of Microchip Technology
MIC2131-1YTSE DC to DC converter applications.

• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment
• Injection molding machinery