MIC2176-3YMM-TR Overview

With its 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package, the switching controller fits the needs of most applications. For outputs of 1, this dc motor controller is suitable. Tape & Reel (TR) solid enclosure protects the pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control operates at 4.5V~75V and has a 4.5V~75V supply voltage. Worked in a -40°C~125°C TJ dc switcher before. In this switching controller, the switch can be set to 300kHz. The Surface Mount allows it to be used for dc dc regulator in general. In order to control switching efficiently, the dcdc regulator features Enable. Searching "MIC2176" will return other relevant dc to dc converter ics. 10 pins are on switching converter. Based on the test statistics, DC regulator outputs voltage 800mV. If you are starting a new project, you should note the dc dc regulator's typical output current is 15A. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 89 %. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. There is a maximum frequency of 375kHz on this dc regulators. Temperatures should be kept at -40°C or higher. There should be 125°C more than 125°C degrees Celsius in the machine. Hyper Speed Control® series dc to dc voltage regulator belong to this series. There is 10-MSOP dc dc controller package associated with this part. DC switchers cannot produce output currents greater than 15A. Phases of this controller are 1.

MIC2176-3YMM-TR Features

Transistor Driver Outputs
Switching Frequency: 300kHz
Enable
Max Duty Cycle: 89 %

MIC2176-3YMM-TR Applications

There are a lot of Microchip Technology
MIC2176-3YMM-TR DC to DC converter applications.

• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots