MIC2582-JBM-TR Overview

In the 8-SOIC (0.154, 3.90mm Width) package you will find it.Channel 1 is currently available.A Tape & Reel (TR)-shaped package holds it.Device DUAL is located at the terminal position.The device consists of a total of 8 pins.As Surface Mount would say, it's set up like that.The electrical component in question falls into the classification Hot Swap Controller.A reliable operation requires the temperature to be set to -40°C~85°C.Apps for General Purpose are available on the device.A feature of Latched Fault describes it.Using a 2.3V~13.2VV power source should be able to power the device.The MIC2582 family includes it.Despite its self-contained nature, Power Management Circuits is a very compact device.Hot-swappable device has Slew Rate, UVLO programmable features.Presently, there is a sufficient supply of 1.5mA.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 2.3 V so that the device can function normally.Vsup is set to 13.2 V, the maximum supply voltage.Part 2.5/12 V is associated with power supplies.As you can see in this example, the gadget uses an analog IC called POWER SUPPLY MANAGEMENT CIRCUIT.The maximum supply current it requires to operate is 2.5 mA.Device --V has a maximum output.With the help of this device, UNDERVOLTAGE LOCKOUT PROTECTION, POWER ON RESET can also be produced.There is an electrical component in this series called --.

MIC2582-JBM-TR Features

The terminal position of 8
Features of Latched Fault
Programmable features of Slew Rate, UVLO
-- series

MIC2582-JBM-TR Applications

There are a lot of Microchip Technology
MIC2582-JBM-TR hot swap controllers applications.

• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies
• Central office switching systems