MIC2585-2MBTS Overview
You get it with the 24-TSSOP (0.173, 4.40mm Width) package.Currently, 2 channels can be accessed.Hot-swappable device comes in the shape of a Tube.Device DUAL is in the terminal position.Total number of pins is 24.The way it's set up is the way Surface Mount wants it.In electrical components, Hot Swap Controller, Sequencer is the classification.If you want reliable performance, you should set the temperature to -40°C~85°C.Hot-swappable device has General Purpose applications.There is a reference to it in Latched Fault.If the power source is 1V~13.2VV, it should work fine.Hot-swappable device is included in the MIC2585 family of numbers.Power Management Circuits contains this gadget on its own.Fault Timeout, OVP, Slew Rate, UVLO features are programmable.Presently, 1.7mA is in short supply.To ensure normal operation, the supply voltage (Vsup) must be kept above 2.3 V.13.2 V is set for Vsup (maximum supply voltage).Part 1/13.2 V uses a power supply that has a voltage.An analog IC, POWER SUPPLY SUPPORT CIRCUIT in this instance, is used for this gadget.Device output is --V at its maximum.Part of the -- series, this electrical component is made of copper.
MIC2585-2MBTS Features
The terminal position of 24
Features of Latched Fault
Programmable features of Fault Timeout, OVP, Slew Rate, UVLO
-- series
MIC2585-2MBTS Applications
There are a lot of Microchip Technology
MIC2585-2MBTS hot swap controllers applications.
- Electric vehicle
-
- Avionics systems
-
- Safe board insertion and extraction
-
- Industrial computers and servers
-
- Redundant-array-of-independent-disk (RAID) storage
-
- Other forms of communications infrastructure
-
- Board or blade insertion into live backplanes
-
- Backplane
-
- Loads
-
- Distributed power systems
-
