SG3526BN Overview
It comes in the 18-DIP (0.300, 7.62mm) package, which makes switching controller suitable for most applications. It is sufficient to generate 2 outputs with this dc motor controller. Packaging for the pmic consists of Tube solid enclosures. The program can handle Transistor Driver dc switching's outputs (s). dc control's supply and operating voltages are 8V~35V. Qualified to work in an dc switcher with 0°C~70°C TA. The switching controller can be switched at 1Hz~500kHz. dc dc regulators can be carried out with Through Hole. Dead Time Control, Enable, Frequency Control, Reset, Soft Start provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. Different dc switching's functions can be applied to 18 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 15V. SG*526 can be searched for other relevant dc to dc converter ics. In total, switching converter has 16 pins. Switching converter type is specifically Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 8V. Statistically, DC regulator outputs 5V volts. In most cases, the output current of the dc dc regulator will be 100mA, so note that when you start the project. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 49 %. DC switcher's Through Hole qualifies it for most applications and prototypes. 500kHz is the frequency of the switching controller. Dormant dc switchings use 18mA. With a current supply of 18mA, it runs.
SG3526BN Features
Transistor Driver Outputs
Switching Frequency: 1Hz~500kHz
Dead Time Control, Enable, Frequency Control, Reset, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 49 %
Frequency: 500kHz
SG3526BN Applications
There are a lot of Microchip Technology
SG3526BN DC to DC converter applications.
- Linear guide
-
- Ball screw pair
-
- Computer application technology
-
- Network technology
-
- Automation technology
-
- CMM
-
- Various precision measuring instruments
-
- Various precision measuring detectors
-
- Flaw detection equipment
-
- Balance equipment
-
